Please register or log in.
Item details add to favorites
Category COMPUTACIÓN
No Picture
Created 2018-04-03
Owner jwen4568
Title What has accelerated the ultrafine mill
Description Followed by the improper lubrication operation of the ultrafine mill in the production or the bearing contamination may also cause the damage of the bearing. Generally, the lubricant or lubricating oil, lubricant or lubricating oil is not added in time during the production process. In place, improper selection of lubricant or lubricant, improper lubrication method, etc. can cause the bearing to be damaged to varying degrees due to lack of oil. In addition, dust, dust, etc. enter the bearing during the production process, causing the bearing to clog. More common is the bearing damage caused by improper installation, because the operator does not understand the installation of the equipment, use brute force in the installation, with the hammer directly hit the bearing bearing damage greater, this is the main cause of deformation, The other is caused by the installation not in place, if the installation is biased or not installed into the bearing position, resulting in bearing clearance is too small, the bearing will be damaged during production。 This article mainly analyzes several reasons for bearing damage during the ultrafine mill process. In addition to these factors, it is also necessary to pay attention to the fact that the bearings of the equipment must not be overloaded. Doing so well can reduce the damage of the bearing during production.
Type Pc
Price  
Promotion level None